Mubychem Group, established in 1976, is the pioneer manufacturer of Iron Sulphide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

----------------

Iron Sulphide Manufacturers, Ferrous Sulfide Manufacturers

MSDS of Ferrous Sulfide Iron Sulphide Sulfide Manufacturers
 

Iron Sulphide
CAS Number 1317-37-9, Lumps, Powder, Sticks

Iron Sulphide or Ferrous Sulfide CAS Number 1317-37-9, offered as Lumps, Powder and Sticks. Only high quality product is offered.

Specification of Ferrous Sulfide

Assay as FeS	80-85%
Fe Content	70-73%
S Content	28-32%

Iron (II) sulfide is a chemical compound with the formula FeS. In practice, iron sulfides are often non-stoichiometric. Powdered iron sulfide is pyrophoric. FeS Ferrous Sulfide or Iron Sulphide can be obtained by reacting iron and sulfur. We can offer Ferrous Sulfide or Iron Sulphide in the form Sticks, Lumps and Powder.

Uses of Ferrous Sulphide
Ferrous Sulfide or Iron Sulphide sticks are widely used as a laboratory chemical for the preparation of Hydrogen Sulphide gas, by famous KIPP'S apparatus when comes in contact with dilute mineral acids.

In foundries, during electric melting, residual sulphur level decreases due to cleaner melting practices and the use of low sulphur steel scrap. It is found that iron does not readily respond to inoculants if Sulphur is below 0.04%. Then it is necessary to re-sulphurize by using Ferrous Sulphide or Iron Sulfide.

In Alloy And Stainless Steel Industries: To Control Hydrogen Embrittlement It is very convenient and economic to use Ferrous Sulphide or Iron Sulfide for re-sulphurization in these steels to hold the right level of 'S' and ensuring not to drop 'S' level.

Iron Sulphide is used as a re-sulphurizing agent in the production of carbon, alloy and stainless types of free cutting steels. It acts as an alloying agent to improve machine ability of steel castings which are used to manufacture various steel components.

Sulphur in form of Ferrous Sulphide or Iron Sulfide is added along with FeSi & FeMn to increase the 'S' contents of electrically melted iron. Addition of FeS influences white iron formation and obtain 'S' contents approximately 0.15%.

In Purification of Crude Phosphoric Acid Ferrous Sulphide or Iron Sulfide is used in cake form as a reducing agent to remove heavy metal impurities from phosphoric acid.

Elemental Sulphur has very low melting point and its tendency to float on the surface of molten metal resulting in the release of Sulphur dioxide, an undesirable gas which pollutes the working environment. Moreover, low melting eutectic brittle compounds form along the grain boundaries and mechanical properties are deteriorated. Hence Ferrous Sulphide or Iron Sulfide and not Sulphur is used for increasing sulphur content of Iron and Steel.

Ferrous Sulphide reacts with hydrochloric acid (HCl), the acidic properties of hydrochloric acid and the pungent fume of hydrogen sulfide can both be demonstrated:

FeS(s) + 2HCl(aq) → FeCl2 (aq) + H2S(g)

Specifications of Iron Sulphide or Ferrous Sulfide 

Iron Sulphide	Specifications
Iron Sulphide as FeS Iron as Fe Sulphur as S	80-85% 70-73% 28-32%

Iron Sulphide Sulfide manufacturers
Ferrous Sulfide Sulphide manufacturers:

MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: us@mubychem.com

Copyright and Usual Disclaimer is Applicable.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride	Calcium Chloride
Magnesium Chloride	Magnesium Sulfate
Potassium Chloride	Sodium Acetate
Sodium Thiosulfate	Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride	Benzyl Alcohol
Boric Acid	Borax; Sodium Borate
Calcium Chloride	Calcium Hydroxide
Calcium Oxide	Calcium Sulfate
Calcium Phosphate	Calcium Saccharate
Chromic Chloride	Citric Acid
Gentian Violet	Magnesium Chloride
Magnesium Sulfate	Manganese Chloride
Manganese Sulfate	Methylene Blue
Maleic Acid	Potassium Chloride
Potassium Acetate	Potassium Phosphate
Sodium Acetate	Sodium Hydroxide Pellets
Sodium Phosphate	Sodium Thiosulfate
Sodium Propionate	Zinc Chloride
Other Best Seller Products:
Aluminium Potassium Sulphate; Potash Alum
Ammonium Persulfate	Ammonium Phosphate
Aluminum Chloride	Barium Chloride
Calcium Nitrite Nitrate	Ceric Ammonium Nitrate
Cupric Chloride
Potassium Phosphate
Sodium Formate	Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate	Sodium Phosphate
Tertiary Butylhydroquinone	Zinc Sulphate
Zinc Ammonium Chloride Flux	Oil Field Chemicals

Global or International Ferrous Sulfide or Iron Sulphide Suppliers, Exporters, Importers, Manufacturers

If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it

Perfection is made up of small thing but it is not small.

29-Apr-2022