Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Zinc Chloride BP USP IP ACS Analytical Reagent Manufacturers
Zinc Chloride IP, Technical & Pure
MSDS of Zinc Chloride IP BP USP ACS Analytical Reagent Manufacturers&
Zinc Chloride
CAS Number 7646-85-7, IP BP Ph. Eur. USP ACS AR FCC Food Grades
Zinc Chloride USP Grade Specifications
Zinc Chloride USP ZnCl2 -- 136.30
Assay— Zinc Chloride
contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage— Preserve in tight containers.
Identification—
A
solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride— Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the
mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly
clear.
Sulfate— Dissolve 1.0 g
in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds
to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts— To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is
re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead— Dissolve 0.50 g
in 5 mL of water, and transfer the solution to a color-comparison tube (A).
Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the
mixture to become clear. In a similar, matched color-comparison tube (B)
place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals
231 ) and 15 mL of Potassium Cyanide Solution (1 in 10).
Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents
of each tube, and allow to stand for 5 minutes: viewed downward over a white
surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline
earths— Dissolve 2.0 g in about 150 mL of water contained in a 200-mL
volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc
completely, dilute with water to volume, and mix. Filter through a dry filter,
and reject the first portion of the filtrate. To 100 mL of the subsequent
filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the
weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements
Zinc Chloride BP Ph Eur Grade Specifications
Zinc Chloride BP ZnCl2
DEFINITION
Content
95.0 per cent to 100.5 per cent.
CHARACTERS
Appearance
White or almost white, crystalline powder or cast
in white or almost white sticks, deliquescent.
Solubility
Very soluble in water, freely soluble in ethanol
(96 per cent) and in glycerol.
IDENTIFICATION
A.
Dissolve 0.5 g in dilute nitric
acid R and dilute to 10 ml with the
same acid. The solution gives reaction of chlorides.
B
5 ml of solution S gives the reaction of zinc.
TESTS
Solution S
To 2.0 g add 38 ml of carbon
dioxide-free water R prepared from
distilled water
and add dilute
hydrochloric acid drop wise until
dissolution is complete. Dilute to 40 ml with carbon
dioxide-free water prepared from
distilled water.
pH
4.6 to 5.5.
Dissolve 1.0 g in 9 ml of carbon
dioxide-free water, ignoring any
slight turbidity.
Oxychloride
Dissolve 1.5 g in 1.5 ml of carbon
dioxide-free water R. The solution is
not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per
cent). The solution may become cloudy
within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute
hydrochloric acid.
Sulphates
Maximum 200 ppm.
Aluminium, calcium, heavy
metals, iron, magnesium
To 8 ml of solution S add
2 ml of concentrated ammonia
R and shake. The solution is clear and colourless.
Add 1 ml of disodium hydrogen phosphate solution.
The solution remains clear
for at least 5 min. Add 0.2 ml of sodium sulphide solution.
A white precipitate is formed and the supernatant liquid remains colourless.
Ammonium
Maximum 400 ppm.
Zinc Chloride Injection USP Grade Specifications
Zinc Chloride Injection is a
sterile solution of Zinc Chloride in Water for Injection. It contains not less
than 90.0 percent and not more than 110.0 percent of the labeled amount of zinc
(Zn).
Packaging and
storage— Preserve Zinc Chloride in single-dose or multiple-dose
containers, preferably of Type I or Type II glass.
Labeling— Label the
Injection to indicate that it is to be diluted with Water for Injection or other
suitable fluid to appropriate strength prior to administration.
Identification— The
Assay preparation prepared as directed in the Assay exhibits an
absorption maximum at about 213.8 nm, when determined as directed in the Assay.
Bacterial endotoxins— It contains not more than 25.0 USP Endotoxin Units per mg of zinc.
pH: between 1.5 and
2.5.
Particulate matter:
meets the requirements for small-volume injections.
Other
requirements— It meets the requirements under
Injections 1
Zinc Chloride ACS Reagent Grade Specifications
American Chemical Society Reagent Grade
Zinc Chloride ZnCl2
Formula Weight 136.30
CAS Number 7646-85-7
REQUIREMENTS
Assay: 97.0%
ZnCl2 Zinc Chloride
MAXIMUM ALLOWABLE
Oxychloride: Passes
test
Insoluble matter: 0.005%
Nitrate (NO3): 0.003%
Sulfate (SO4): 0.01%
Ammonium (NH4): 0.005%
Calcium (Ca): 0.06%
Iron (Fe): 0.001%
Lead (Pb): 0.005%
Magnesium (Mg): 0.01%
Potassium (K): 0.02%
Sodium (Na): 0.05%
Zinc Chloride is used for Friedel Craft Reaction, Azotropic or Azeotropic Distillation & Desiccation.
Zinc Chloride BP USP IP ACS Analytical Reagent manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Zinc Chloride BP IP USP FCC Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
30-Apr-2022