Mubychem Group, established in 1976, is the pioneer manufacturer of Iron Sulphide Ferrous Sulfide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Iron Sulphide Ferrous Sulfide Manufacturers, MSDS Sheet
Iron Sulphide Ferrous Sulfide Sulphide Manufacturers
Iron Sulphide MSDS Sheet Ferrous Sulfide Material Safety Data Sheet
Section 1 - Chemical Product and Identification
MSDS Name: Iron Sulphide
Synonyms: Ferrous sulfideSection 2 - Composition, Information on Ingredients
Chemical Name: Iron Sulphide or Ferrous Sulfide
CAS#: 1317-37-9
EINECS/ELINCS: 215-268-6
Percent: 100Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Caution! It may cause irritation. The toxicological properties of this material have not been fully investigated.
Appearance: It is gray to brown black solid.
Target Organs: None.
Potential Health Effects
Eye: Iron Sulphide dust may cause mechanical irritation.
Skin: Ferrous sulfide may cause skin irritation.
Ingestion: Iron Sulphide may cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation: Ferrous sulfide may cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic: Not available.Section 4 - First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Antidote: None reported.Section 5 - Fire Fighting Measures
General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam.
Flash Point: Not applicable.
Auto ignition Temperature: Not applicable.
Explosion Limits, Lower: Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: 1; Flammability: 0; Instability: 0Section 6 - Accidental Release Measures
General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.Section 7 - Handling and Storage
Handling: Use Ferrous sulfide with adequate ventilation. Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage: Store Iron Sulphide in a cool, dry, well-ventilated area away from incompatible substances.Section 8 - Exposure Controls, Personal Protection
Engineering Controls: For Iron Sulphide or Ferrous sulfide use adequate ventilation to keep airborne concentrations low.
Exposure Limits
ACGIH
NIOSH
OSHA - Final PELs
1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
None listed
OSHA Vacated PELs: Iron (II) Sulfide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.Section 9 - Physical and Chemical Properties
Physical State: Solid
Appearance: Iron Sulphide or Ferrous sulfide is gray to brown black
Odor: None reported
pH: Not available.
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Evaporation Rate: Not applicable.
Viscosity: Not applicable.
Boiling Point: Decomposes.
Freezing/Melting Point: 1194 deg C
Decomposition Temperature: Not available.
Solubility: It is insoluble in water.
Specific Gravity/Density: 4.84
Molecular Formula: FeS
Molecular Weight: 87.907Section 10 - Stability and Reactivity
Chemical Stability: Iron Sulphide or Ferrous sulfide is stable under normal temperatures and pressures.
Conditions to Avoid: Moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials: Strong acids.
Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide.
Hazardous Polymerization: Has not been reported for Iron Sulphide or Ferrous sulfide.Section 11 - Toxicological Information
RTECS#: CAS# 1317-37-9 unlisted.
LD50/LC50: Not available.
Carcinogenicity: CAS# 1317-37-9: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Epidemiology: No data available.
Teratogenic: No data available.
Reproductive Effects: No data available.
Mutagenic: No data available.
Neurotoxicity: No data available.
Other Studies:Section 12 - Ecological Information
No information available.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.Section 14 - Transport Information
US DOT
Canada TDG
Shipping Name:
Not regulated as a hazardous material
No information available.
Hazard Class:
UN Number:
Packing Group:
Section 15 - Regulatory Information
USA FEDERAL
TSCA
CAS# 1317-37-9 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313
No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletory.
This material does not contain any Class 2 Ozone depletory.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC): R36- Irritating to eyes.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 1
Reactivity: 0
Personal Protection: J
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Not applicable. Lab coat. Not applicable. Splash goggles.Section 16 - Additional Information
Disclaimer:
******************************
Our company provides this information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Iron Sulfide or Ferrous Sulphide Sulfide MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************Iron Sulphide manufacturers Ferrous Sulfide Sulphide manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 91-22- 23723564. 91-22-23728264e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright and Usual Disclaimer is Applicable.Global or International Ferrous Sulfide or Iron Sulphide Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo itPerfection is made up of small thing but it is not small.