Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Phosphate Tribasic, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Indonesia, Spain etc. |
|
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Trisodium Phosphate Tribasic Sodium Phosphate Tribasic ACS Analytical Reagent USP NF FCC Food grade Manufacturers
Mono Di Tri Sodium Phosphate Commercial & IP grade Manufacturers
Sodium Phosphate Tribasic
Technical & Pure Trisodium
Phosphate, Tribasic Sodium Phosphate
CAS Number 10101-89-0 & 7601-54-9, IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Tribasic Sodium Phosphate Tribasic
Tri Sodium Phosphate or Trisodium Phosphate (TSP), or trisodium phosphate or tribasic sodium phosphate or sodium phosphate tribasic is available at most hardware stores in white powder form, is a cleaning agent, stain remover and degreaser, commonly used to prepare surfaces for painting. It can also be called Tri sodium orthophosphate and has the chemical formula Na3PO4; however, it is generally found in hydrated forms. Sodium Phosphate Tribasic is a highly water-soluble ionic salt.
Trisodium phosphate can also be found as a food additive; it is used as an acidity regulator (buffering agent), emulsifier, thickening agent, nutrition enlargement agent and sequestrant (metal-chelating agent). In these uses, all sodium phosphates may be collectively referred to as sodium phosphate, or by E number E339. The same is true when sold as an enema, working as a laxative to treat constipation.
Cleaning products labeled as TSP Sodium Phosphate Tribasic may contain other ingredients as well, and may in fact be less than half TSP. So even "regular" TSP found at the hardware store may be half TSP and half "TSP substitute". Some large home improvement centers that sell paint no longer offer TSP.
Sodium Phosphate Tribasic TSP is commonly used after cleaning with mineral spirits in order to then clean up all the mineral spirits. TSP may be used with household chlorine bleach in the same solution, and this is particularly good for removing mildew from wood. The TSP alone can cause dark stains on redwood, and bleach prevents it. It is also used in various forms as a boiler treatment chemical for calcium precipitation, as well as regulating the caustic effects of DSP in coordinated phosphate chemistry. Sodium Phosphate Tribasic is also used to clean swimming pool polyester filter elements.
| Specification |
Trisodium Phosphate Crystals Sodium Phosphate Tribasic |
Trisodium Phosphate Anhydrous Sodium Phosphate Tribasic |
|
P2O5 content Assay Loss on Drying pH of 2% Solution Insoluble Packing |
19% 98% Less than 58% 11.5-12.5 Less than 0.025% 50 Kg HDPE Bags |
49.5% 98% 1% max 11.5-12.5 Less than 0.05% 50 Kg HDPE Bags |
Use
These items are only used as food additives. They are added to many foods as
an emulsifier to prevent oil separation. Some examples are processed
cheeses, processed meats, ready-made meals and tinned (canned) soups.
They are also commonly added to powdered soups, boullions and gravy
mixtures.
They can also be used as a leavening agent. Some examples of these foods
include the batter coating on breaded fish or chicken, and commercially
baked cakes.
Adding this item to food increases the shelf life of the food,
maintaining the texture and appearance of the food.
Sodium Phosphate Tribasic Dodecahydrate ACS Reagent Grade Specifications
Na3PO4-12H2O
Formula Weight 380.12
CAS Number 10101-89-0
NOTE. This salt, when stored under ordinary conditions, may lose some water of crystallization. Any loss in water will result in an assay of more than 100% Na3PO4 . 12H2O but does not affect the determination of the relative amount of free alkali present.
REQUIREMENTS
Assay: 98.0-102.0% Na3PO4
-12H2O
MAXIMUM ALLOWABLE
Excess alkali (as NaOH): 2.5%
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.01%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Tribasic Sodium Phosphate USP NF Grade Specifications
Tribasic
Sodium Phosphate
Na3PO4
(anhydrous) 163.94
Phosphoric
acid, trisodium salt, dodecahydrate.
Trisodium
phosphate, dodecahydrate 380.13 [CAS 10101-89-0]
Trisodium
phosphate, monohydrate 181.96
Anhydrous [CAS 7601-54-9]
Tribasic Sodium Phosphate is anhydrous or contains one to twelve molecules of water of hydration. Na3PO4 (anhydrous) and Na3PO4·H2O (monohydrate) contain not less than 97.0 percent of Na3PO4, calculated on the ignited basis; Na3PO4·12H2O (dodecahydrate) contains not less than 92.0 percent of Na3PO4, calculated on the ignited basis.
Identification— A solution (1 in 20) meets the requirements of the tests for
Sodium and for Phosphate.
Loss on
ignition— Dry a portion at 100 for 5 hours. Ignite about 2 g, accurately
weighed, of the dried sample at about 800 for 30 minutes: calculated on the
dried basis, the anhydrous form loses not more than 2.0% of its weight, the
monohydrate loses between 8.0% and 11.0% of its weight, and the dodecahydrate
loses between 45.0% and 57.0% of its weight.
Insoluble substances— Dissolve a portion equivalent to 10.0 g of anhydrous
tribasic sodium phosphate in 100 mL of hot water, and filter through a tarred
filtering crucible. [NOTE—Do not use glass.] Wash the insoluble residue with hot
water, and dry at 105 for 2 hours: the weight of the residue so obtained does
not exceed 20 mg (0.2%).
Arsenic—3
µg per g.
Heavy
metals—0.001%.
Trisodium
Phosphate
Na3PO4
Formula wt, anhydrous 163.94
Na3PO4·12H2O Formula wt, dodecahydrate 380.12
INS:
339(iii) CAS anhydrous 7601-54-9
CAS dodecahydrate 10101-89-0
DESCRIPTION
Sodium
Phosphate, Tribasic, occurs as white crystals or granules or as a crystalline
material. It may be anhydrous or contain 1 to 12 molecules of water of
hydration. The formula for a crystalline material is approximately
4(Na3PO4·12H2O)- NaOH. It is freely soluble in water, but is insoluble in
alcohol. The pH of a 1:100 aqueous solution is between 11.5 and 12.5.
Function: Antimicrobial; buffer; emulsifier; nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for
Sodium
and for Phosphate.
Assay: Anhydrous and Monohydrate: Not less than 97.0% of Na3PO4, calculated
on the ignited basis; Dodecahydrate: Not less than 90.0% of Na3PO4,
calculated on the ignited basis.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on
Ignition Anhydrous: Not more than 2.0%; Monohydrate: Between
8.0% and 11.0%; Dodecahydrate: Between 45.0% and 57.0%.
Tri Trisodium Phosphate Tribasic Sodium Phosphate Tribasic USP NF ACS Analytical Reagent FCC Food grade manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Tribasic Sodium Phosphate Tribasic or Trisodium Phosphate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.
30-Apr-2022