|
Mubychem Group, established in 1976, is the pioneer manufacturer of Caustic Soda Sodium Hydroxide Pellets, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Caustic Soda Sodium Hydroxide Pellets Manufacturers, MSDS Sheet
MSDS of Caustic Soda Sodium Hydroxide Pellets Manufacturers
Sodium Hydroxide Pellets
Caustic Soda Pellets Technical & Pure Tablets
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Sodium Hydroxide Pellets MSDS Sheet, Material Safety Data Sheet
Section 1: Product Identification
Synonyms: Caustic Soda Pellets; Sodium Hydroxide solid;
Sodium
Hydrate; Sodium Hydroxide Pellets
CAS No.: 1310-73-2
Molecular Weight: 40.00
Chemical Formula: NaOH
Section 2: Composition / Information on Ingredients
Ingredient: Sodium Hydroxide Pellets
CAS No.: 1310-73-2
Percent: 99 - 100%
Hazardous: Yes
Section 3: Hazard Identification
Emergency overview
Immediate effects: Danger! Poison! Causes severe respiratory tract, eye
and skin burns. May be fatal if swallowed. Harmful if inhaled. Cause damage
to the following organs: Respiratory tract, skin, eye lens or cornea
Potential health effects
Primary Routes of entry: Absorbed through skin. Eye contact. Inhalation.
Ingestion.
Signs and Symptoms of Overexposure: Causes severe burns on contact with any
body tissue. Vapor is irritating to the eyes and respiratory passages.
Eyes: Sodium Hydroxide Pellet is Extremely hazardous in case of eye
contact ( corrosive). Causes severe eye burns.
Skin: Extremely hazardous in case of skin contact ( corrosive). Skin
contact produces severe burns. Hazardous in case of skin contact (permeator).
Ingestion: Extremely hazardous in case of ingestion. May be fatal if
swallowed.
Inhalation: Extremely hazardous in case of inhalation ( lung corrosive).
Hazardous in case of inhalation.
Chronic Exposure: Extremely toxic and corrosive.
Chemical Listed As Carcinogen Or Potential Carcinogen: No.
Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. In case of
contact, immediately flush eye with plenty of water for at least 15 minutes.
Cold water may be used. Get medical attention immediately.
Skin Contact: Immediately flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Call a physician,
immediately. Wash clothing before reuse..
Ingestion: If swallowed, do not induce vomiting unless directed to do so
by medical personnel. Never give anything by mouth to and unconscious
person. Loosen tight clothing such as a collar, tie, belt or waistband. Get
medical attention immediately.
Medical Conditions generally Aggravated by Exposure: Repeated exposure of
the eyes to a low level of Sodium hydroxide dust can produce eye irritation.
Repeated skin exposure can produce local skin destruction, or dermatitis.
Repeated inhalation of dust can produce varying degree of respiratory
irritation or lung damage.
Section 5: Fire Fighting Measures
Flash Point: NA
Fire Extinguishing Media: NA
Special Fire Fighting Procedures: NA.
Unusual Fire and Explosion Hazards: Flammable hydrogen gas may be produced
on prolong contact with metals such as aluminum, tin lead and zinc.
Hazardous combustion products: NA
Section 6: Accidental Release Measures
Steps to be Taken in Case Material is Released or Spilled: Evacuate
the area of all unnecessary personnel. Wear suitable protective equipment.
Eliminate any ignition sources until the area is determined to be free from
explosion or fire hazards. Contain the release and eliminate its source, if
this can be done without risk. Take up and containerize for proper
disposal. Comply with local, state and Federal regulations on reporting
releases. Refer to regulatory information for reportable quantity and other
regulatory data.
Waste Disposal Methods: Dispose of waste according to Federal, State and
Local Regulations.
Section 7: Handling and Storage
Keep Sodium hydroxide Pellets in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Always add the caustic to water while stirring; never the reverse. Containers of Sodium hydroxide may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Do not store with aluminum or magnesium. Do not mix with acids or organic materials.
Section 8: Exposure Controls / Personal Protection
Engineering Controls Ventilation required: Sodium hydroxide should be handled or transferred
in an approved fume hood or with adequate ventilation.
Personal Protection Equipment
Respiratory protection: If workplace exposure limit (s) of product or any
component is exceeded (see TLV/PEL), a NIOSH/MSHA approved air supplied
respirator is advised in absence of proper environmental control. OSHA
regulations also permit other NIOSH/MSHA respirator (negative pressure type)
under specified conditions (see your safety equipment supplier). Engineering
and/or administrative controls should be implemented to reduce exposure.
Protective gloves: Nitrile or equivalent.
Skin protection: Impervious, protective clothing.
Eye protection: Safety glasses with side shields must be worn at all times.
Additional clothing and/or equipment: Eyewash and safety equipment should be
readily available.
Section 9 Physical and Chemical Properties
Appearance and Physical State: Sodium hydroxide is white Solid
(flakes, pellets or granular)
Odor (threshold): Odorless.
Specific Gravity (H2O=1): 2.13
Vapor Pressure (mm Hg): NA
Vapor Density (air=1): NA
Melting Point: 318C (604F)
Boiling Point: 1390.04C (2534.1F)
Freezing point / melting point: 318.38C (605.1F)
pH: ND
Solubility in Water: Soluble
Section 10: Stability and Reactivity
Stability: Sodium hydroxide is stable under ordinary conditions of
use and storage. Very hygroscopic.
Conditions to Avoid: Contact with moisture may generate sufficient heat to
ignite surrounding combustible material.
Materials to Avoid (Incompatibility): Water, acids, chlorinated
hydrocarbons, metals, and organic materials.
Hazardous Decomposition Products: None indicated.
Hazardous Polymerization: Will not occur.
Section 11: Toxicological Information
Results of component toxicity test performed: ORL-rabbit LDLO: 500mg/kg.
Tests on laboratory animals indicate material may produce adverse mutagenic
effects.
Human experience: Extremely hazardous in case of eye contact (
corrosive). Causes severe eye burns.
Extremely hazardous in case of skin contact (corrosive). Skin contact produces severe burns. Hazardous in case of skin contact (permeator). Extremely hazardous in case of inhalation ( lung corrosive). Hazardous in case of inhalation. Extremely hazardous in case of ingestion. May be fatal if swallowed. This product does not contain any compounds listed by NTP or IARC or regulated by OSHA as a carcinogen.
Section 12: Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Section 13 Disposal Considerations
RCRA 40 CFR 261 Classification: Material does not have an EPA Waste Number and is not a listed waste.
Federal, State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.
Section 14: Transportation Information
US DOT Information:
Proper shipping name: Sodium Hydroxide, solid
Hazard Class: 8
Packaging group: II
UN Number: UN1823
IATA:
Proper shipping name: Sodium Hydroxide, solid
Hazard Class: 8
Packing group: II
UN Number: UN1823
IMO:
Proper shipping name: Sodium Hydroxide, solid
Class: 8
UN Number: UN1823
Packing group: II
EMS: ND
MFAG: ND
Marine Pollutant: No
Canadian TDG: ND
Section 15: Regulatory Information
SARA: 302/304/311/312 extremely hazardous substances: No products were
found.
SARA Title III: 302/304 emergency planning and notification: No products
were found.
RCRA: Material does not have an EPA Waste Number and is not a listed
waste.
TSCA: 8(b) inventory: Sodium Hydroxide
CERCLA: 1000 lbs.
California Proposition 65: None
Canada WHMIS: Class D-1B: Material causing immediate and serious toxic
effects (TOXIC). Class E: corrosive solid.
CEPA DSL: Sodium Hydroxide.
Europe EINECS Numbers No Data: 215-185-5
OSHA: Hazardous by definition of Hazard Communication Standard (29
CFR 1910.1200). EINECS: This product is on the European Inventory of
Existing Commercial Chemical Substances.
WHMIS (Canada): CLASS E: Corrosive solid.
DSCL (EEC):
R35- Causes severe burns. S26- In case of contact with eyes, rinse
immediately with plenty of water and seek medical advice.
S37/39- Wear suitable gloves and eye/face protection. S45- In case of
accident or if you feel unwell, seek medical advice immediately (show the
label where possible).
HMIS (USA):
Health Hazard: 3
Fire Hazard: 0
Reactivity: 2
Personal Protection: J
National Fire Protection Association (USA):
Health: 3
Flammability: 0
Reactivity: 1
Specific hazard:
Protective Equipment:
Gloves. Synthetic apron. Vapor and dust respirator. Be sure to use an
approved/certified respirator or equivalent. Wear appropriate respirator
when ventilation is inadequate. Splash goggles.
Section 16: Other Information
Disclaimer:
******************************
Our company provides this Caustic Soda Sodium hydroxide MSDS information
sheet contained herein in good faith but makes no representation as to its
comprehensiveness or accuracy. This Sodium Hydroxide MSDS sheet is intended only as a guide to the appropriate precautionary
handling of the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
******************************
Caustic Soda Sodium Hydroxide Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Hydroxide Pellets or Caustic Soda Pellets BP USP AR ACS Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.