|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium formaldehyde bisulphite, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium hydroxymethanesulfonate Sodium formaldehyde bisulfite manufacturers, MSDS Sheet
Sodium hydroxymethanesulphonate Sodium formaldehyde bisulphite manufacturers MSDS Sheet
MSDS of Sodium Formaldehyde Bisulfite Sodium Formaldehyde Bisulphite
Sodium Formaldehyde Bisulfite
Sodium Hydroxymethanesulfonate Crystals
Sodium Formaldehyde Bisulfite MSDS Sheet, Sodium Hydroxymethanesulfonate Material Safety Data Sheet
Section 1 - Chemical Product Identification
Name:
Formaldehyde Sodium Bisulfite.
Synonym: Formaldehyde sodium bisulfite; Formbis; Monosodium
hydroxymethanesulfonate; Sodium hydroxymethanesulfonate; Sodium
hydroxymethylsulfonate
Section 2 - Composition, Information on Ingredients
Chemical Name:
Formaldehyde Sodium Bisulfite or Sodium Formaldehyde Bisulfite Sodium
Hydroxymethanesulfonate
CAS #: 870-72-4
Percent: 95
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Caution! Sodium
Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate may cause
eye, skin, and respiratory tract irritation. Hygroscopic (absorbs
moisture from the air). The toxicological properties of this
material have not been fully investigated.
Slightly hazardous in case of skin contact (irritant), of eye
contact (irritant), of ingestion, of inhalation.
Target Organs: None known.
Potential Health
Effects
Eye:
Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate may
cause eye irritation.
Skin: May
cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Section 4 - First Aid Measures
Eyes:
Check for and remove any contact lenses. In case of contact,
immediately flush eyes with plenty of water for at least 15 minutes.
Cold water may be used. Get medical attention if irritation occurs.
Skin:
Wash with soap and water. Cover the irritated skin with an
emollient. Get medical attention if irritation develops. Cold water
may be used.
Ingestion:
Do not induce vomiting. Get medical aid if irritation or symptoms
occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to
Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a
self-contained breathing apparatus in pressure-demand, MSHA/NIOSH
(approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 184 deg C ( 363.20 deg F)
Auto ignition Temperature: 500 deg C ( 932.00 deg F)
Section 6 - Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient
waste disposal container. Finish cleaning by spreading water on the
contaminated surface and dispose of according law.
Large Spill: Use a shovel to put the material into a convenient waste
disposal container. Finish cleaning by spreading water on the
contaminated surface and allow to evacuate through the sanitary
system.
Section 7 - Handling and Storage
Handling: Use Sodium Formaldehyde Bisulfite or
Sodium Hydroxymethanesulfonate with adequate ventilation. Minimize
dust generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate ventilation to keep airborne
concentrations low.
Exposure Limits: Formaldehyde
Sodium Bisulfite or Sodium Hydroxymethane Sulfonate or Sodium Formaldehyde
Bisulfite is not listed by ACGIH, NIOSH, OSHA - Final PELs
Personal Protective
Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection regulations in 29 CFR
1910.133 or European Standard EN166.
Skin: Wear
appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149
must be followed whenever workplace conditions warrant respirator
use.
Section 9 - Physical and Chemical Properties
Physical State: Sodium Formaldehyde Bisulfite
or Sodium Hydroxymethane Sulfonate is solid.
Appearance: white
Odor: None reported.
pH: 7 - 8 (100g/L aq sol)
Freezing/Melting Point: 200 deg C (decom)
Decomposition Temperature: 200 deg C
Solubility: 800 g/L (20C)
Molecular Formula: CH3NaO4S
Molecular Weight: 134.08
Section 10 - Stability and Reactivity
Chemical Stability: Hygroscopic; absorbs
moisture or water from the air.
Conditions to Avoid: Incompatible materials, dust generation,
exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur,
carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#:
CAS# 870-72-4: PB2200000
LD50/LC50:
CAS# 870-72-4:
Oral, rat: LD50 = 3200
Carcinogenicity:
CAS# 870-72-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Section 12 - Ecological Information
Ecotoxicity: No data available. No information
available.
Environmental: No information available.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded
chemical is classified as a hazardous waste. US EPA guidelines for
the classification determination are listed in 40 CFR Parts 261.3.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
Transport is not regulated.
Section 15 - Regulatory Information
TSCA
CAS# 870-72-4 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting
List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test
Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section
313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous
Substances under the CWA.
None of the chemicals in this product are listed as Priority
Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic
Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly
hazardous by OSHA.
STATE
CAS# 870-72-4 is not present on state lists from CA, PA, MN,
MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this
product are listed.
European Labeling in Accordance with EC Directives.
Hazard Symbols:
Not available.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 870-72-4: 1
Canada - DSL/NDSL
CAS# 870-72-4 is listed on Canada's DSL List.
Canada - WHMIS
This product has a WHMIS classification of D2B.
Section 16 - Additional Information
Disclaimer:
******************************
Our company provides this
Sodium Formaldehyde Bisulfite or Sodium
Hydroxymethanesulfonate MSDS information sheet contained herein
in good faith but makes no representation as to its comprehensiveness or
accuracy. This Sodium Formaldehyde Bisulphite or Sodium
Hydroxymethanesulphonate MSDS information sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving
the information must exercise their independent judgment in
determining its appropriateness for a particular purpose.
******************************
Sodium hydroxymethanesulfonate manufacturers;
Sodium formaldehyde bisulfite manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Bisulphite Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.