|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Bromide, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Bromide Manufacturers, MSDS Sheet
Sodium Bromide
Technical & Pure Crystals
Sodium Bromide MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Sedoneural; Sodium Bromide
CAS No.: 7647-15-6
Molecular Weight: 102.89
Chemical Formula: NaBr
2. Composition/Information on Ingredients
Ingredient: Sodium Bromide
CAS No.: 7647-15-6
Percent: 100%
3. Hazards Identification
Emergency Overview
WARNING! HARMFUL IF SWALLOWED. AFFECTS CENTRAL NERVOUS SYSTEM, BRAIN AND
EYES. MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
Potential Health Effects
Inhalation:
Sodium Bromide dust may cause irritation to the respiratory tract; symptoms may include
coughing and shortness of breath.
Ingestion:
It may cause nausea, vomiting and abdominal pain. Ingestions are usually promptly
rejected by vomiting, but sufficient absorption may occur to produce central
nervous system, eye and brain effects. Symptoms may include skin rash, blurred
vision and other eye effects, drowsiness, irritability, dizziness, mania,
hallucinations, and coma.
Skin Contact: Sodium Bromide dry material may cause mild irritation. Solutions may cause irritation, redness,
and pain.
Eye Contact: It may cause irritation, redness and pain.
Chronic Exposure: Sodium Bromide repeated or prolonged exposure by any route may cause skin rashes (bromaderma).
Repeated ingestion of small amounts may cause central nervous system depression,
including depression, ataxia, psychoses, memory loss, irritability, and
headache.
Aggravation of Pre-existing Conditions:
Persons suffering from debilitation, depression, alcoholism, neurological or
psychological disorders may be more susceptible to the effects of this compound.
4. First Aid Measures
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Call a physician.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give
anything by mouth to an unconscious person. Call a physician.
Skin Contact:
In case of contact with Sodium Bromide, immediately flush skin with plenty of water for at least 15
minutes. Remove contaminated clothing and shoes. Wash clothing before reuse.
Call a physician.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting
lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Fire:
Sodium Bromide is not considered to be a fire hazard.
Explosion: Sodium Bromide is
not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire over
Sodium Bromide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved
self-contained breathing apparatus with full face piece operated in the pressure
demand or other positive pressure mode.
6. Accidental Release Measures
Ventilate area of leak or spill of Sodium Bromide. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
7. Handling and Storage
Keep Sodium Bromide in a tightly closed container, stored in a cool, dry, ventilated area. Protect Sodium Bromide against physical damage. Containers of Sodium Bromide may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established for
Sodium Bromide.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee
exposures as low as possible. Local exhaust ventilation is generally preferred
because it can control the emissions of the contaminant at its source,
preventing dispersion of it into the general work area. Please refer to the
ACGIH document, Industrial Ventilation, A Manual of Recommended Practices,
most recent edition, for details.
Personal Respirators (NIOSH Approved):
For conditions of use where exposure to dust or mist is apparent and engineering
controls are not feasible, a particulate respirator (NIOSH type N95 or better
filters) may be worn. If oil particles (e.g. lubricants, cutting fluids,
glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or
instances where the exposure levels are not known, use a full-face
positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators
do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench
facilities in work area.
9. Physical and Chemical Properties
Appearance:
Sodium Bromide is
white crystals, granules, or powder.
Odor: Odorless.
Solubility:
Sodium Bromide solubility is
116 g/l00 g water @ 50C (122F)
Specific Gravity: 3.21 for Sodium Bromide.
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: 1390C (2534F)
Melting Point: 755C (1391F)
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage. Absorbs moisture from air.
Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization:
Will not occur.
Incompatibilities: Acids, alkaloidal and heavy metal salts, oxidizers, and bromine trifluoride.
Conditions to Avoid: Moisture and incompatibles.
11. Toxicological Information
Toxicological Data: Oral rat LD50: 3500 mg/kg. Investigated as a reproductive effector.
Reproductive Toxicity: Causes reproductive system effects in laboratory animals.
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Sodium Bromide container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
Chemical Weapons Convention:
No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: Yes; Fire: No; Pressure: No
Reactivity: No (Pure /
Solid)
Australian Hazchem Code:
None allocated.
Poison
Schedule: None allocated.
US Federal and State Regulations: TSCA 8(b) inventory: Sodium
bromide
EINECS: This product is on the European Inventory of Existing
Commercial Chemical Substances.
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC):
R36- Irritating to eyes. S2- Keep out of the reach of children. S24/25-
Avoid contact with skin and eyes. S46- If swallowed,
seek medical advice immediately and show this container or label.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified
respirator or equivalent. Splash goggles.
16. Other Information
Disclaimer:
****************************
Our company provides this Sodium Bromide MSDS information sheet contained
herein in good faith but makes no representation as to its comprehensiveness
or accuracy. This Sodium Bromide MSDS sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
****************************
Sodium Bromide manufacturers at:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Bromide Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.