|
Mubychem Group, established in 1976, is the pioneer manufacturer of Copper Cupric Chloride Dihydrate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Copper Cupric Chloride Dihydrate Manufacturers, MSDS Sheet
Copper Cupric Chloride Dihydrate Anhydrous Manufacturers
Cupric Chloride Anhydrous MSDS
Cupric
Chloride Dihydrate
Copper Chloride Dihydrate
Copper or Cupric Chloride Dihydrate MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Coppertrace; Copper (2+) chloride dihydrate
CAS No.: 10125-13-0
Molecular Weight: 170.48
Chemical Formula: CuCl2.2H2O
2. Composition/Information on Ingredients
Ingredient: Cupric Chloride
CAS No.: 10125-13-0
Percent: 97 - 100%
Hazardous: Yes
3. Hazards Identification
OSHA Hazards:
Hazardous
HMIS Classification
Health hazard: 3
Flammability: 0
Physical hazards: 0
NFPA Rating
Health hazard: 3
Fire: 0
Reactivity Hazard: 0
Contact Rating: 3 - Severe
Protective Equip: Goggles, Lab Coat.
Emergency Overview
This is a hygroscopic material. It may cause allergic skin reaction. Inhalation of fumes may cause fever.
DANGER! Causes eye and skin burns. May cause severe respiratory tract irritation with possible burns. May cause severe digestive tract irritation with possible burns.
Potential Health Effects
Eye: Causes eye burns. Exposure to particulates or
solution may cause conjunctivitis, ulceration, and corneal abnormalities.
May cause redness, pain, and blurred vision. Splashes from solutions may
cause eye damage
Skin: May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color. Symptoms include redness and Pain.
Ingestion: May cause severe damage to the digestive tract. Causes gastrointestinal irritation with nausea, vomiting and diarrhea. Causes gastrointestinal tract burns. May cause systemic effects. Get medical attention immediately.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.May cause ulceration and perforation of the nasal septum if inhaled in excessive quantities. Causes chemical burns to the respiratory tract.
Chronic: Prolonged or repeated skin contact may cause dermatitis. Repeated skin contact of Cupric Chloride can cause varying degrees of problems ranging from dermatitis to ulcerations. Repeated Inhalation can cause copper to accumulates in various tissues and may result in liver, kidney, and brain damage.
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get
medical attention.
Skin Contact: Wipe off excess material from skin then immediately
flush skin with plenty of water for at least 15 minutes. Remove contaminated
clothing and shoes. Get medical attention. Wash clothing before reuse.
Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least
15 minutes, lifting lower and upper eyelids occasionally. Get medical
attention immediately.
5. Fire Fighting Measures
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire: Copper Chloride is not considered to be a fire hazard.
Explosion: Copper Chloride is Slightly explosive in presence of heat
& Metals.
Fire Extinguishing Media: Use any means suitable for extinguishing
surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or
carbon dioxide.
Special Information: In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
face piece operated in the pressure demand or other positive pressure mode.
At high temperatures o.r when moistened under fire conditions, it may
produce toxic or irritating fumes. On decomposition it may emit hydrogen
chloride. Containers may explode on heating
6. Accidental Release Measures
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure
adequate ventilation. Use appropriate tools to put the spilled solid in a
convenient waste disposal container. Finish cleaning by spreading water on
the contaminated surface and dispose of according to local and regional
authority requirements.
Large Spill: Cupric chloride is a corossive solid. Avoid touching the
spilled material. Do not let the product enter drains. Use a shovel to put
the material into a convenient waste disposal container. Do not contaminate
the environment.
7. Handling and Storage
Toxic! Do not ingest. Do not breathe dust. Wear suitable protective
clothing. In case of insufficient ventilation, wear suitable respiratory
equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash
hands thoroughly after handling. Provide appropriate exhaust ventilation at
places where dust is formed. If you feel unwell, seek medical attention.
Keep Copper Chloride in a tightly closed container, stored in a cool, dry,
ventilated area. Protect against physical damage.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Permissible 1 mg/m3 TWA (dust and mist,
as Cu, except copper fume) (listed under Copper compounds, n.o.s.).100 mg/m3
IDLH (dust and mist, as Cu) (listed under Copper compounds, n.o.s.).
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of
the contaminant at its source, preventing dispersion of it into the general
work area.
Personal Respirators (NIOSH Approved): For conditions of use where
exposure to dust or mist is apparent and engineering controls are not
feasible, a particulate respirator may be worn. For emergencies or instances
where the exposure levels are not known, use a full-face positive-pressure,
air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering
clothing.
Eye Protection: Use chemical safety goggles and/or full face shield
where dusting or splashing of solutions is possible. Maintain eye wash
fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust
deposits on floors and other surfaces may pick up moisture and cause the
surfaces to become slippery and present safety hazards. Handle in accordance
with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: Cupric Chloride is blue-green powder or crystals.
Odor: It is odorless.
Solubility: It is freely soluble in water. 76 parts in 100 parts
water @ 25 deg. C
pH: 3-3.8.
Density: 2.54 g/mL at 20C (68F)
Molecular formula: CuCl2.2H2O
Molecular weight: 170.48
% Volatiles by volume @ 21C (70F): -
Boiling Point: NA
Melting Point: 100C decomposes
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Cupric Chloride is stable under ordinary conditions of
use and storage.
Hazardous Decomposition Products: It emits toxic chlorine or hydrogen
chloride fumes when heated to decomposition. It may form cupric oxide and
hydrogen chloride and chlorine.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, metals & acids. Also
incompatible with potassium, sodium, hydrazine, nitromethane, acetylene,
sodium hypobromite.
Conditions to Avoid: Incompatibles and moisture.
11. Toxicological Information
Acute toxicity
Toxic if swallowed. Chronic exposure may cause damage to a variety of
body organs. Harmful if inhaled.
Toxicity data
ORL-RAT LD50 NA mg kg-1
ORL-MAM LD50 NA mg kg-1
However following information for CAS# 7447-39-4 is found
Oral, mouse: LD50 = 233 mg/kg;
Oral, rat: LD50 = 584 mg/kg;
Oral, rat: LD50 = 140 mg/kg;
Routes of Entry: Inhalation. Ingestion. Skin
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not known to be a carcinogen.
Mutagenic Effects: Mutagenic for bacteria and/or yeast. May cause
damage to the following organs: kidneys, lungs, liver, skin.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
The substance may be toxic to heart. Repeated or prolonged exposure to the
substance can produce target organs damage.
12. Ecological Information
Environmental Fate: Not available.
Environmental Toxicity: It is also toxic to fish.
Harmful to aquatic life in very low
concentrations. Copper Chloride Dihydrate is toxic to fish and marine
organisms when applied to streams, rivers, ponds or lakes.
BOD5 and COD: Not available.
Products of Biodegradation: Possibly hazardous short term degradation
products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of
degradation are less toxic than the product itself.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
US DOT Classification:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8
Packing group: III
Identification: 8(Corrosive)
Canada TDG Classification:
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8
Packing group: III
Identification: 8(Corrosive)
IATA
UN-Number: UN 2802
Shipping Name: Copper Chloride
CLASS 8
Packing group: III
Identification: 8(Corrosive)
15. Regulatory Information
OSHA Hazards
Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200).
SARA 302 Components
No chemicals in this material are subject to the reporting requirements
of SARA Title III, Section 302.
SARA Codes
CAS # 10125-13-0: acute,
chronic.
SARA 313 Components
This material contains Cupric chloride (Copper compounds), (CAS#
10125-13-0) which is subject to the reporting requirements of Section 313 of
SARA Title III and 40 CFR Part 373.
SARA 311/312 Hazards
Component CAS # 7447-39-4
Fire Hazard: No
Reactivity Hazard: No
Pressure Hazard: No
Immediate Health Hazard: Yes
Chronic Health Hazard: Yes
Massachusetts Right To Know Components
Listed
Pennsylvania Right To Know Components
Listed
New Jersey Right To Know Components
Listed
California Prop. 65 Components
This product does not contain any chemicals known to State of California
to cause cancer, birth defects, or any other reproductive harm.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
Copper Chloride Dihydrate (CAS # 10125-13-0) is listed as a Priority and
Toxic Pollutant under the Clean Water Act.
CAS# 7447-39-4 is listed as a Hazardous Substance under the CWA.
None of the chemicals in this product are listed as Priority Pollutants
under the CWA. CAS# 10125-13-0 is listed as a Toxic Pollutant under the
Clean Water Act. CAS# 7447-39-4 is listed as a Toxic Pollutant under the
Clean Water Act.
EINECS: EC Number: 231-210-2
Hazard Symbols:
XN N
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system and skin.
R 50/53 Very toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice.
S 29 Do not empty into drains.
S 37/39 Wear suitable gloves and eye/face protection.
S 57 Use appropriate containment to avoid environmental contamination.
WGK (Water Danger/Protection)
CAS# 10125-13-0: No information available.
CAS# 7447-39-4: 2
Canada - DSL/NDSL
CAS# 7447-39-4 is listed on Canada's DSL List.
Canada - WHMIS
CLASS D-1B: Material causing immediate and serious toxic effects
(TOXIC).
CLASS E: Corrosive solid.
Canadian Ingredient Disclosure List
CAS# 10125-13-0 is not listed on the Canadian Ingredient Disclosure
List.
However CAS# 7447-39-4 is listed on Canada's DSL List.
TSCA
CAS# 10125-13-0 is not on the TSCA Inventory. It is a hydrate and exempt
from TSCA Inventory requirements (40CFR720.3(u)(2)).
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
CAS# 7447-39-4: 10 lb
final RQ; 4.54 kg final RQ
DSCL (EEC):
R22- Harmful if swallowed.
R37/38- Irritating to respiratory system and skin.
R41- Risk of serious damage to eyes.
S26- In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
S28- After contact with skin, wash immediately with plenty of water. S37/39-
Wear suitable gloves and eye/face protection.
S45- In case of accident or if you feel unwell, seek medical advice
immediately (show the label where possible).
HMIS (U.S.A.):
Health Hazard: 3
Fire Hazard: 0
Reactivity: 0
Personal Protection: j
National Fire Protection Association (U.S.A.):
Health: 3
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified
respirator or equivalent. Wear appropriate respirator when ventilation is
inadequate. Splash goggles.
Australian Hazchem Code: -
Poison Schedule: -
16. Other Information
Disclaimer:
**********************************
Our company provides this Cupric Chloride Dihydrate MSDS sheet in
good faith but makes no representation as to its comprehensiveness or
accuracy. This Cupric Chloride Dihydrate MSDS sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. The above information has been
compiled from various sources and has the possibility of discrepancy and
being out-dated information. Individuals receiving the information must
exercise their independent judgment and do further search in determining its
appropriateness for a particular purpose. In no case shall our company be
liable to loss or damages by the product user.
**********************************
Copper Chloride Dihydrate Manufacturers
Cupric Chloride Dihydrate Manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Copper Cupric Chloride Dihydrate Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.