|
Mubychem Group, established in 1976, is the pioneer manufacturer of Sodium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Gujarat and Mumbai India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc. |
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001 Certified; "REACH" Pre-registered; ISO-22000; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals |
|
--------
--------
Sodium Chloride Manufacturers, MSDS
Sodium Chloride BP USP ACS FCC IP Manufacturers
Sodium Chloride
Pure Crystals, IP BP Ph. Eur. USP ACS AR LR
Sodium Chloride MSDS Sheet, Material safety Data Sheet
Section 1 - Chemical Product and Identification
MSDS Name: Sodium Chloride
Synonyms: Common salt; Halite; Rock salt; Saline; Salt; Sea salt; Table
salt.
Section 2 - Composition, Information on Ingredients
Chemical Name: Sodium chloride
CAS#: 7647-14-5
Percent:: 100
Einecs EC No.: 231-598-3
Section 3 - Hazards Identification
Potential Health Effects
Eye:
May cause eye
irritation.
Skin:
May cause skin
irritation.
Ingestion:
Ingestion
of large amounts may cause gastrointestinal irritation. Ingestion of large
amounts may cause nausea and vomiting, rigidity or convulsions. Continued
exposure can produce coma, dehydration, and internal organ congestion.
Inhalation:
May cause
respiratory tract irritation.
Chronic: No
information found.
Section 4 - First Aid Measures
Eyes:
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting
the upper and lower eyelids. Get medical aid.
Skin: Flush skin with
plenty of soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Get medical aid if irritation develops or persists. Wash
clothing before reuse.
Ingestion: If victim
is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash
mouth out with water.
Inhalation: Remove
from exposure to fresh air immediately. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid if cough or
other symptoms appear.
Notes to Physician:
None
Section 5 - Fire Fighting Measures
General
Information: Water runoff can cause environmental damage. Dike and collect water used to
fight fire. Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact
with thermal decomposition products. Substance is noncombustible.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Section 6 - Accidental Release Measures
General
Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum
or sweep up material and place into a suitable disposal container. Clean up
spills immediately, observing precautions in the Protective Equipment section.
Avoid generating dusty conditions. Provide ventilation.
Section 7 - Handling and Storage
Handling:
Use with adequate ventilation. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed. Do not
ingest or inhale.
Storage: Store in a
cool, dry, well-ventilated area away from incompatible substances. Store
protected from moisture.
Section 8 - Exposure Controls, Personal Protection
Engineering
Controls: Good general ventilation should be sufficient to control airborne levels.
Facilities storing or utilizing the material should be equipped with an eyewash
facility and a safety shower.
Exposure Limits: Sodium Chloride is not listed
by ACGIH NIOSH & OSHA-Final PELs.
Personal Protective Equipment
Eyes: Wear safety
glasses with side shields.
Skin: Wear appropriate
gloves to prevent skin exposure.
Clothing: Wear
appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator
or European Standard EN 149.
Section 9 - Physical and Chemical Properties
Physical
State: Solid
Appearance: Colorless or white
Odor:
Odorless
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point:1474 deg F
Auto ignition Temperature: Not available.
Flash Point: Not applicable.
Decomposition Temperature: Not available
NFPA Rating: (estimated) Health: 1; Flammability: 0; Reactivity: 0
Explosion Limits: Not available.
Solubility:
Soluble.
Specific Gravity/Density: 2.165
Molecular Formula: NaCl
Molecular Weight: 58.43
Section 10 - Stability and Reactivity
Chemical Stability: Stable.
Conditions to Avoid: High temperatures, exposure to moist air or water.
Incompatibilities with Other Materials: It reacts with most non-noble metals
such as iron or steel, building materials (such as cement), bromine, or
trifluoride. Potentially explosive reaction with dichloro-maleic anhydride +
urea. Electrolysis of mixtures with nitrogen compounds may form explosive
nitrogen tri-chloride.
Hazardous Decomposition Products: Toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#:
CAS# 7647-14-5: VZ4725000
LD50/LC50:
Draize test, rabbit, eye: 100 mg Mild;
Draize test, rabbit, eye: 100 mg/24H Moderate;
Draize test, rabbit, eye: 10 mg Moderate;
Draize test, rabbit, skin: 50 mg/24H Mild;
Draize test, rabbit, skin: 500 mg/24H Mild;
Inhalation, rat: LC50 = >42 gm/m3/1H;
Oral, mouse: LD50 = 4 gm/kg;
Oral, rat: LD50 = 3 gm/kg;
Skin, rabbit: LD50 = >10 gm/kg;<BR.
Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: No information reported.
Teratogenic: An experimental teratogen.
Reproductive Effects: Human reproductive effects by intraplacental route:
terminates pregnancy. Experimental reproductive effects.
Neurotoxicity: No information reported
Mutagenicity: See actual entry in RTECS for complete information.
Section 12 - Ecological Information
Ecotoxicity:
No data available. No information found.
Environmental: No information reported.
Physical: No information found.
Other: No information found.
Section 13 - Disposal Considerations
Chemical waste generators
must determine whether a discarded chemical is classified as a hazardous waste.
US EPA guidelines for the classification determination are listed in 40 CFR
Parts 261.3. Additionally, waste generators must consult state and local
hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
Transportation of Sodium Chloride is not regulated.
Section 15 - Regulatory Information
US Federal and State Regulations: TSCA 8(b) inventory: Sodium
chloride
EINECS: This product is on the European Inventory of Existing Commercial
Chemical Substances.
WHMIS (Canada): Not controlled under WHMIS (Canada).
DSCL (EEC):
R40- Possible risks of irreversible effects. S24/25- Avoid contact with skin
and eyes.
HMIS (U.S.A.):
Health Hazard: 1
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified
respirator or equivalent. Splash goggles.
Section 16 - Additional Information
Disclaimer:
******************************
Our company provides this
Sodium Chloride MSDS information
sheet contained herein in good faith but makes
no representation as to its comprehensiveness or accuracy. This Sodium Chloride MSDS sheet is intended only as a guide to the appropriate
precautionary handling of the material by a properly trained person using
this product. Individuals receiving the information must exercise their
independent judgment in determining its appropriateness for a particular
purpose.
******************************
Sodium chloride manufacturers:
MUBYCHEM GROUP
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23774610, 91-22- 23723564. 91-22-23728264
e-mail: info@mubychem.com
USA & Canadian Customers may e-mail: us@mubychem.com
Copyright
and Usual
Disclaimer
is Applicable.
Global or International Sodium Chloride Suppliers, Exporters, Importers, Manufacturers
If I give you “My Word” Nobody can undo it.
If I sign an “Agreement” my Lawyer will undo it
Perfection is made up of small thing but it is not small.