Logo

Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Chloride, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai etc.

The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP. We offer Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals

Chemical Products--------Phase Change Material--------Contact/E-mail

Exporter & Importer Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Export Packing Drum Packing By Air Exports

Ammonium Chloride BP USP FCC Food Grade ACS Manufacturers

USP BP IP ACS FCC Food Grade, AR Analytical Reagent Grade

CAS No.: 7646-85-7;  Molecular Weight: 53.5; Chemical Formula: NH4Cl

MSDS Click here
Ammonium Chloride BP USP IP FCC ACS FCC Food grade Manufacturers

Ammonium Chloride IP LR AR Analytical Reagent Technical & Pure Manufacturers

Ammonium Chloride
Pure Crystals, Tablets, Blocks, Bricks Pellets
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades

Ammonium Chloride

 

Ammonium Chloride USP

NH4Cl 53.49

Assay— Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Identification— A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying— Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition— Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate— Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.


Ammonium Chloride BP

NH4Cl

DEFINITION
Content or Assay
99.0 per cent to 100.5 per cent (On dried substance basis).

CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Freely soluble in water.

IDENTIFICATION
A. It gives the reactions of chlorides.
B. 10 ml of solution gives the reaction of ammonium salts.

TESTS
Solution S
A 10% solution:
Appearance of solution: Solution is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1 ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min, add 2 ml of chloroform R and shake vigorously. The chloroform layer remains colourless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.00 g by drying in an oven at 105 °C for 2 h.
Sulphated ash: Maximum 0.1 per cent, determined on 2.0 g.


Ammonium Chloride FCC Food Grade

NH4Cl Formula wt 53.49

DESCRIPTION
Ammonium Chloride occurs as colorless crystals or as a white, fine or coarse, crystalline powder. It is somewhat hygroscopic. One gram dissolves in 2.6 mL of water at 25°, in 1.4 mL of boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH of a 1:20 solution is between 4.5 and 6.0.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Ammonium and for Chloride.
Assay: Not less than 99.0% of NH4Cl after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 0.5%.

Ammonium Chloride ACS

American Chemical Society Analytical Reagent Grade
Ammonium Chloride
NH4Cl Formula Wt 53.49
CAS Number 12125–02–9

REQUIREMENTS
Assay . . . . . . . . . . . . . . . . ≥99.5% NH4Cl
pH of a 5% solution . . . . .  4.5–5.5 at 25 °C

MAXIMUM ALLOWABLE
Insoluble matter . . . . . . . . 0.005%
Residue after ignition . . . .  0.01%
Calcium (Ca) . . . . . . . . . . 0.001%
Magnesium (Mg) . . . . . . . 5 ppm
Heavy metals (as Pb) . . . . 5 ppm
Iron (Fe) . . . . . . . . . . . . . 2 ppm
Phosphate (PO4). . . . . . . 2 ppm
Sulfate (SO4). . . . . . . . ... 0.002%

Blocks Salammoniac; Salamaka NH4Cl Tablet

Ammonium Chloride manufacturers
Ammonium Chloride BP USP IP FCC ACS Food AR Grade Manufacturers:

MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23774610, 23723564. FAX: 91-22-23728264

e-mail: info@mubychem.com

USA & Canadian Customers may e-mail: usa@mubychem.com

India Manufacturer Logo
Copyright
and Usual Disclaimer is Applicable.
Last updated: 11 June, 2014.

Old Spice: Manufacturing since more than Three Decades:
Ammonium Chloride Calcium Chloride Magnesium Chloride Potassium Chloride
Sodium Acetate Sodium Diacetate Sodium Thiosulfate Zinc Chloride
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Ammonium Chloride Benzyl Alcohol Boric Acid Borax; Sodium Borate
Calcium Chloride Calcium Hydroxide Calcium Oxide Calcium Sulfate
Calcium Phosphate Calcium Saccharate Chromic Chloride Citric Acid
Gentian Violet Magnesium Chloride Magnesium Sulfate Manganese Chloride
Manganese Sulfate Methylene Blue Maleic Acid Potassium Chloride
Potassium Acetate Potassium Phosphate Sodium Acetate Sodium Bicarbonate
Sodium Phosphate Sodium Hydroxide Pellets Sodium Thiosulfate  
Sodium Propionate Zinc Chloride    
Other Best Seller Products:
Ammonium Persulfate Ammonium Phosphate Aluminum Chloride Barium Chloride
Calcium Nitrite Nitrate Ceric Ammonium Nitrate Calcium Propionate Cupric Chloride
Ferrous Sulfide Magnesium Sulfate Potassium Iodide Potassium Bromide
Potassium Phosphate Potassium Nitrate Nitrite Sodium Formaldehyde Bisulfite
Sodium Bromide Sodium Butyrate Sodium Nitrite Nitrate
Sodium Chloride Sodium Formate Sodium Monochloro Acetate
Sodium Propionate Sodium Phosphate Zinc Ammonium Chloride Galvanizing Flux
Zinc Sulphate   Calcium-Magnesium Acetate  
Ammonical Etchant Oil Field Chemicals Isatoic Anhydride & Derivatives
Butylated Hydroxyanisole Butylated Hydroxytoluene Methyl & Dimethyl Anthranilate
Isatoic Anhydride Potassium Phthalimide Tertiary Butylhydroquinone

Ammonium Chloride IP BP USP ACS FCC Food Grade AR Analytical Reagent Manufacturers

Global or International Ammonium Chloride Pure BP USP FCC Food Grade Commercial Suppliers, Exporters, Importers, Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Perfection is made up of small thing but it is not small.